REAL STITCH HEAT-SEAL APPLICATION

Recommended heat-press settings. Times and temperatures may vary.
Testing on all garments is recommended. We have free samples.

Download PDF here.

ON COTTON FABRICS

Pre-Heat garment for 10 seconds.
Pre-Heat bottom pad for 60 seconds.
Cover applique with Teflon / Kraft paper.
Heat at 400°F for 25 seconds at 80 lbs pressure.

ON POLYESTER FABRICS

Pre-Heat garment for 5 seconds.
Position applique in place with heat resistant tape.
Turn garment inside out and cover with Teflon / Kraft paper.
Heat at 360°F for 50 seconds at 80 lbs pressure.

FOR USE ON: Cotton, Cotton/Poly Blends, 100% Polyester, Fleece and Wool.
DOES NOT WORK ON: Leather, Some Nylon, Some Types of Coatings on Athletic Mesh and Safety Gear.

APPLYING EMBLEMS ON FLAT GARMENTS

Step 1: Set emblem on garment.

Step 2: Use teflon paper to protect the emblem.

Step 3: Apply heat to the emblem and garment.

APPLYING EMBLEMS ON HATS

Step 1: Set hat into heat press with hat band turned out.

Step 2: Set emblem to hat with heat tape.

Step 3: With teflon paper on top of emblem, apply heat to hat.